Mi-T-M Compressor/Generator/Welder AGW-SM14-B 5000W 14HP 50-170ADC

AGW-SM14-B

Maximum performance in a single machine, the industrial air compressor, generator, welder combination can tackle any job in the shop or in the field.

Compressor Pump: Cast iron compressor pump · Splash lubricated · Stainless-steel braided discharge hose · Large canister intake filter · Oil level sight indicator

Generator: Brush-type 2 pole 120V/240V alternator · Total harmonic distortion (THD) less than 6% · 100% copper windings

Welder: Amperage selection switch, 170A or 220A maximum

Frame: 16-gauge powder coated two-piece belt guard

Components: Regulator and two gauges for tank and outlet pressure · Manual drain valves for proper maintenance · 16.5-inch fly wheel

AGW Series Operation
Generator Mode: AC current only · Selector switch set to idle down · Switch is set to full throttle
Welder Mode: DC current only · Engine must be running full throttle · Selector switch must be set to full throttle

All models sold in California are required to have the AX-0080 CARB compliant fuel tank.
Equipped with 150-PSI maximum rated regulator.

Specifications

• Displacement/ Engine

  420cc Mi-T-M OHV with Electric Start – Battery and Battery Cables Not Included

• Rated Speed

  3600 RPM

• CFM @ 90 PSI

  16.4

• CFM @ 175 PSI*

  15.7

• Tank Size

  Not Applicable – Base-Mount Model

• Max. AC Output

  5000 watts

• Rated AC Output

  4500 watts

• Alternator Wattage: Cont. On-Load @ 90 PSI

  3000 watts

• Alternator Wattage: Cont. On-Load @ 175 PSI

  2500 watts

• Frequency/Voltage

  60Hz/120V/240V

• Max. Amps (120V/240V)

  41.5/20.8 Off-Load

• Cont. Amps (120V/240V)

  37.5/18.8 Off-Load

• Receptacles

  (2) 120V, 20A GFCI Duplex; (1) 120V/240V, 20A Twist Lock

• Duty Cycle (10 Min. Run Time)

  150A @ 100%

• DC Voltage

  50-170A Working Range

• Fuel Tank

  1.85 gallon