Saylor-Beall 20 HP Pressure-Lubricated 9000 Series

Saylor-Beall 20 HP Pressure-Lubricated 9000 Series

The Saylor-Beall 20 HP series represents the pinnacle of reciprocating air technology, designed for massive industrial air demand. These units utilize the legendary Model 9000 pump, an American-made, 4-cylinder V-configuration beast built for extreme durability and high output.

Choose Your Lubrication System

The 20 HP models are available with two distinct lubrication designs to match specific duty cycles:

• Splash-Lubricated: The standard for reliability in stationary applications. It uses oil dippers on the connecting rods to distribute lubricant throughout the crankcase. This is a highly effective, time-tested system for standard industrial cycles on a level foundation.
• Pressure-Lubricated (PL): Engineered for severe duty or continuous run environments. It features a positive displacement oil pump that forces filtered oil directly to the crankshaft and connecting rods through a rifle-drilled system. It also includes an automotive-style spin-on oil filter, ensuring cleaner lubrication and a significantly longer pump life.

Standard vs. Performance Packages

You can configure the 20 HP system with either a basic setup or a fully optimized industrial package.

Standard Package

Includes the core industrial essentials:

• Heavy-duty ASME horizontal tank (typically 200 or 240 gallons).
• NEMA-rated magnetic starter for motor protection.
• ODP-certified industrial motor designed for 24/7 service.
• Centrifugal unloader for no-load starting.

Performance Package (FP)

Transforms the unit into a complete, “plug-and-play” air station by adding:

• Air-Cooled Aftercooler: Drops discharge temperatures to force moisture out of the air before it enters the lines.
• Automatic Tank Drain: Automatically purges water to prevent tank corrosion and downstream contamination.
• Low Oil Level Switch: Safely shuts down the motor if oil levels drop, protecting the pump from catastrophic failure.
• Vibration Isolator Pads: Minimizes noise and mechanical stress on the shop floor.
• Quiet Intake Filter: Oversized filter housing to lower the overall decibel level of the intake stroke.

Technical Specifications (20 HP Simplex)

Why This Unit Sells Itself

The 20 HP Saylor-Beall is built on a “slow-running” philosophy. While competitors use smaller pumps at high RPMs to reach their CFM ratings, the Model 9000 achieves massive displacement at only 640 RPM. This means less heat, less friction, and a machine that is built to be rebuilt, not replaced.